Trustpilot Logo   Trustpilot Stars

Open Today: 9am - 6pm

I agree for Surveyor Local to contact me.

CLOSE

Last updated: 30th October, 2026
Written by: Surveyor Local

Quality check

30 Oct, 2026/ by Surveyor Local /News

When you order a Level 2 or Level 3 survey from a qualified chartered surveyor, you can expect a certain level of detail regarding the condition and stability of the property that you are planning on buying.

But there are some items that a surveyor will be unable to report on, one of those being the radon levels in the property. That is to say that they won't measure the levels found in the home, but they will do some investigation and provide their recommendations.


What is radon?

Radon is a naturally occurring gas that is created from the decay of uranium embedded in the rocks and soils around the United Kingdom, with the highest concentrations being in granite and rocky locations, which means radon is particularly prevalent in Cornwall, Devon, the Cotswolds, Wales, northern Scotland, the Pennines and parts of Northern Ireland. The radon gas is odourless, tasteless and invisible to the naked eye.

The reason why radon is of particular interest for homebuyers is that it seeps into buildings built over seams of these rocks, coming up through cracks in floorboards and through unprotected cellars, with over 1,100 lung cancer deaths each year attributable to the gas, according to the UK Health Security Agency (UKHSA).


How is radon measured?

This doesn't mean that finding radon in a home is a cause for alarm: it's the level of the gas that is the concern. The gas is measured in becquerels per cubic metre (Bq/m³), and UKHSA has set the level at 200 Bq/m³ before action is required to avoid potential health issues.

The average measurement of radon across the UK is around 20 Bq/m³. However, for a property with a high reading, the remedial activity aims to bring that reading down below 100 Bq/m³.


Testing and reducing radon levels

Radon is radioactive, and the very mention of "radioactivity" is enough to scare many people who will be worried about the levels either in their current home or in one they are planning on buying. Testing for radon is simple and effective, with detectors placed in key rooms of the home (usually a bedroom and the living room) over a period of about three months. If you do this yourself, you can then send the detectors off to a laboratory to analyse the findings.

If the readings are high enough, there are some ways of helping to reduce the radon levels, such as installing a radon sump (essentially a suction sump placed underneath the floor that draws the air from beneath the property and expels the radon harmlessly into the air outside). Additionally, ventilation systems can be installed to achieve the same result. In both cases, radon levels should be remeasured to verify the successful reduction over that time.


What your surveyor checks for radon

Given the health risks if the readings are high, you might reasonably expect a survey to highlight any high levels of radon for action to be subsequently taken to reduce it. However, since the measurement has to happen over an extended period of weeks, it is not possible for your chartered surveyor to measure the radon levels as part of the Level 2 or Level 3 surveys.

But what they are able to do with respect to the survey is check the UKHSA radon risk map for the area in which the subject property is located to see if it is in a high risk area or not. They will also check the construction of the home to establish how radon might enter into the home (for example, suspended floors, concrete blocks, unprotected cellars, etc.).

If the surveyor identifies the home as being in a reasonably high risk area, they will recommend that the levels of radon should be monitored. This doesn't require a specialist to carry out the task as you can obtain kits and take the measurement yourself.


What to do if the home is in a radon affected area

This becomes more difficult when you are not the current owner, of course, so you will want to discuss the issue with your conveyancing solicitor. Your conveyancer's local authority search will show whether the property is in a radon affected area, and the seller's property information form (TA6) asks whether a radon test has been carried out and whether any protective measures were installed. If a previous radon test has proven positive, you might wish to obtain those results and details of any activity that has been adopted to reduce those levels.

Ultimately, if the levels are in the danger zone, action will need to be taken to mitigate the problem, which will come at a cost. If you want to continue with the purchase of the home, you'll need to talk to your solicitor, and factor any potential costs of that and any remedies into renegotiations of the asking price.

Whatever your plans for moving home or buying your next property, make sure that your budget includes the all-important survey. Surveyor Local will connect you to the best professional advice through our nationwide panel of chartered surveyors, all of whom are members of the RICS, ensuring the survey you get is always professionally delivered. They will work hard to identify all kinds of problems, including how radon could enter the property.


Get your survey quote

Call   to get your no-obligation survey quote started, or to discuss any concerns about the property you're planning to buy.

Or get a quick survey quote online by entering a few details about you and the property, and we'll email you an instant quote. We'll do the rest once you accept it.

Share this news post:

More from this category